Quick programming by brand
This allows you to manually program a device according to the brand. To identify the codes for your device, see the list of codes.
- Turn on your TV.
- Press and hold the SET button until the red light flashes twice, then release.
- Enter the manufacturer’s code. The red light will flash twice.
- Press the PWR button. If the TV turns off, programming is done.
- If not, repeat steps 2 to 4, using the following manufacturer’s code.
Note : If your TV is not in this list, refer to the automatic search method.
Programming by automatic search
This allows you to find a compatible programming code for your device from the list of codes in the remote control.
- Turn on your TV.
- Press and hold the SET button until the red light flashes twice, then release.
- Enter code 9, 9, 1. The red light will flash twice.
- Press CH+ multiple times until the TV turns off. This operation may take several minutes as all codes are tested one by one.
- Once the TV turns off, press SET to lock in the code.